ExoShield ULTRA kits are designed and pre-formed to fit OEM windshields. There may be some cases where the aftermarket windshield is significantly different in shape and will not be compatible with the kit unless additional heat-forming is applied during installation. As a result, we can only guarantee full compatibility with OEM windshields.
Yes! While ExoShield is developed to protect your windshield without the need for extra coatings, many installers prefer to add a ceramic coating as one more line of defense against weathering and abrasion. If you're curious about which ceramic coating to use, here are a few we've tested successfully. Read this blog to learn more:
https://www.getexoshield.com/blog/ceramic-coatings-windshield-protection
In short: condition is more important than a specific type or brand. It's important to make sure your wiper blades are in good condition. If you see noticeable wear and tear, they should be replaced prior to use on an ExoShield-protected windshield. If you're in the market for a replacement, here are a few we've tested. Read more in this blog:
https://www.getexoshield.com/blog/best-windshield-wipers
Paint protection film is a durable exterior layer that protects your vehicle’s paint against rock chips, scratches, and various forms of damage. PPF is a great way to extend the life of your paint while keeping it looking fresh for years to come. Paint Protection Film has a wide range of quality, value and cost. Make sure to do your research, and ultimately choose a product and installer you trust with this investment in vehicle protection.
Yes! GT3+ is designed and tested in Canada, where we have freezing cold winters of -40C and hot summers of +40C. We also have partners all over the world who provide us with real-world performance information. Once GT3+ has been installed and has fully cured, it should not be affected by high heat and humidity, snow and ice, or ice scrapers etc.
It is! GT3+ has hydrophobicity built into its top layer, which means that water will roll more easily off of the surface. To enhance the hydrophobic effect, you can apply additional ceramic coatings onto your GT3+ or ULTRA film. For the list of approved coatings, click here.
ExoShield's windshield protection products are clear, durable films made up of Alchemy's proprietary technology. It is a layered laminate film that consists of a nano-composite hardcoat, a flexible shock -absorbing substrate, and a strong ultra-clear adhesive. We offer both PET based windshield protection films (GT3+, ULTRA) as well as TPU based films (SPRINT).
All warranty claims with ExoShield are processed through our ExoShield partners. To make a warranty claim, please contact your ExoShield installer to start the process. If you have moved, or your installer is no longer in business, please contact us here.
Yes, and we're proudly the ONLY windshield protection manufacturer to offer this extended warranty in North America. The Glass Protection Warranty is an optional $1000 of windshield replacement coverage in the event of an impact damaging the windshield through ExoShield GT3+ or ULTRA. Interested in learning more? Check out the GPW page here.
Windshield Protection Film helps prevent everyday windshield damage, but we also know that accidents can happen and that ExoShield is not bulletproof. When you purchase ExoShield, we offer an extended Glass Protection Warranty that will cover you against any rock chip damage to your windshield up to $1000. Learn more here or ask your local certified ExoShield installer.
Great question! We often recommend using coatings to help maximize the lifetime of your GT3+ purchase. There are many different types of coatings on the market, and not all coatings are created equal! Check out this blog post on coatings that we've tested for use with ExoShield. Contact us directly if you have a question about a specific coating, and our team will do our best to help!
You are required to register your ExoShield GT3+ purchase here, or follow the instructions on the back of the ExoShield Care & Warranty Card that you received at the time of installation. If you did not receive this card or have misplaced it, please contact your installer to receive a new one. If you have still not received this email and cannot locate it in your junk email folder, first contact your ExoShield installer to confirm that they have registered your purchase with the correct email address. If you're still having issues, please contact us at team@getexoshield.com and we'll help you resolve the issue!
Don't worry, we have an electronic version of the Care Guide! You can download it here. You can also find an electronic copy of the Care Guide in the confirmation email you received from us when your ExoShield installer registered your purchase.
Wear and tear is not covered by our limited product warranty. While our GT3+ and ULTRA product are engineered to prevent scratches during standard driving conditions, there is always a chance something could scratch the surface of the film. Scratching will not effect the impact resistance of the film, so depending on the level of wear - you can choose to continue driving with the scratch, or consider replacing your film.
No, there is no need to purchase specific wiper blades for ExoShield. We do suggest that you inspect your wipers before your windshield protection film installation in case they are worn and need to be replaced.
The useable lifespan of windshield protection film is up to each driver. If you notice your film is starting to wear, or if at anytime you notice a negative change in your driving experience we recommend reaching out to your installer for guidance on next steps. In many cases, there are steps you can take to clean unwanted buildup from the surface of the film. If a removal and replacement of the film is needed, we also recommend connecting with your installer for next steps.
We recommend talking to your installer before attempting the removal process yourself. To remove windshield protection film, gently heat the film with a heat gun or steamer to soften the adhesive. Starting from one corner, slowly peel off the film at a shallow angle, applying additional heat as needed. Work your way across the windshield, removing the film in sections as needed. Use a residue remover like diluted isopropyl alcohol to dissolve any leftover adhesive, then clean the surface with automotive soap and water. Finally, polish and wax the surface to restore shine and protection.
The beauty of PPF film is that if one piece has a defect or gets particularly scratched, your installer can replace that single panel at any time. The film acts as a sacrificial layer, absorbing the damage so when it is removed - in most cases, the painted surface underneath remains untouched.
Typically, regular washing and detailing are sufficient to maintain the appearance of your PPF. That being said, harsh chemicals or abrasive materials should be avoided to prevent damage to the film. Most PPF manufacturers (ExoShield included!) will also caution against pressure washing the film, as this can cause edges to lift. Always discuss a maintenance plan with your installer before you take the vehicle home to ensure you’re getting the most out of your investment! If possible, avoid automatic "touch" carwashes altogether as these will prematurely wear down any automotive protection film.
Yes, you can apply a ceramic coating to paint protection film, providing additional protection and enhancing it's overall performance. Ceramic coating creates a transparent, protective layer on top of the PPF, which helps repel water, dirt, and other contaminants, making cleaning and maintaining the film easier. Consult your installer for details regarding which coating is the right match for your ppf.
To remove paint protection film, gently heat the film with a heat gun or steamer to soften the adhesive. Starting from one corner, slowly peel off the PPF at a shallow angle, applying additional heat as needed. Work your way across the vehicle, removing the film in sections. Use a residue remover to dissolve any leftover adhesive, then clean the surface with automotive soap and water. Finally, polish and wax the surface to restore shine and protection. If unsure, consider seeking professional assistance to avoid damaging the paint.
This depends on the specific brand & product you purchase, but most brands will claim that their product will last from 6-12 years with proper care and maintenance. With premium film like ExoShield MACH 12 the film should stay securely attached to the vehicle and maintain impact performance throughout the warranty period. With MACH 12, you can expect as long as 12 years of protection and product warranty. MACH S has an expected lifespan of 10 years, backed by a 10 year warranty. However, surface properties like hydrophobicity will naturally wear out over time, lasting anywhere from a few months to over a year with premium films. While the film's self-healing property is long-lasting, its effectiveness may be limited over time.
Through Authorized ExoShield Installing Partners - Find your nearest installer by visiting our partner map.
PPF can be applied to most surfaces, with glass being the exception. The type of film used in PPF is not optically clear enough to safely be used on a windshield, which is why products like GT3+ exist and have been optimized for protecting glass. All painted surfaces, carbon fibre parts, headlights, plastics & interiors can be protected with PPF. Do you have a protection job in mind, but aren't sure if you can, or should use PPF? Connect with an Authorized ExoShield installer for their expert opinion!
Paint protection film is designed to protect the paint on your vehicle, not damage it. When properly installed and maintained, PPF forms durable layer that shields the paint However, improper installation or low-quality PPF may potentially cause issues such as adhesive residue, bubbling, or discoloration over time. It's essential to choose a reputable installer and high-quality PPF product to minimize the risk of any adverse effects on your vehicle's paint.
The cost to protect each vehicle varies depending on level of coverage, finish (gloss vs satin vs colored) and the overall difficulty of the particular installation. Connect with your local ExoShield Authorized Installer for a quote - Find An Installer
Based on extensive testing, ceramic coatings are recommended for use with ExoShield GT3+. These coatings enhance hydrophobicity, reducing the need to use your wiper blades and helping prevent the build-up of dirt and haze on the surface. You can find the full guide here.
Most regulations prohibit any films to be on the windshield that reduce a drivers visibility. ExoShield Windshield Protection Films have a VLT of 91.5% which does not result in a change in the drivers visibility. This is not legal advice, please refer to your local tint laws for more information.
On average, you can expect to get up to 24-36 months out of your ExoShield windshield protection film, but this can be extended with good care and maintenance practices. With each purchase of ExoShield windshield protection film we include a care instruction package that will educate you on how to best take care of your windshield. You can also learn more about maximizing the lifetime of your windshield protection film here.
Many new vehicles use advanced cameras and sensors to provide advanced safety systems such as lane-keep assist, collision warnings, and more. With many of these systems located right under the windshield, we made sure that ExoShield's windshield protection film is compatible with all of these systems. Our windshield protection film is completely invisible to any cameras and sensors on your vehicle, meaning that your safety features will work as usual once your film is installed!
Windshield wipers themselves will not scratch ExoShield's windshield protection film. However, the risk of scratching increases when the windshield is covered with sand or debris from the road that becomes impregnated into the soft material of the wiper blade. We do have some tips to help you reduce the risk of scratching. Click here to learn more about how to maximize the lifetime of your windshield protection film.
ExoShield's windshield protection film is engineered for a high level of optical clarity to ensure the driver's view of the road remains unobstructed. When installed on a new windshield, our WPF only reduces visible light transmittance by 1.5%, which is not noticeable to the naked eye.
Windshield protection film is a difficult product to install if you do not have the correct tools, installation area, or experience. All ExoShield GT3+ installations must be carried out by a trained, certified ExoShield Partner. We pride ourselves on partnering only with the best and most reputable aftermarket automotive shops, so you know that you will get a quality ExoShield install every time! You can find the closest certified ExoShield installer here.
Depending on your vehicle, we do offer some DIY windshield protection film kits for off-road & flat-glass applications. Check out ExoShield ULTRA for the latest available models.
The cost to protect each windshield varies, depending on car make, windshield protection product and where you are having the installation completed. The best way to find out what your windshield would cost to protect, is to connect with an installer for a quote to protect your specific vehicle.
Windshield Protection Film is a clear, exterior film that is designed to absorb impacts, prevent wear and tear damage, extending the life of any windshield. ExoShield has a variety of windshield protection options, including the industry's most durable WPF: ExoShield GT3+. On average, protecting a vehicles windshield with ExoShield Windshield Protection film increases the impact protection by 6X, to defend against highway speed rock hits. For a full breakdown on ExoShield's Windshield Protection Films click here.
Automotive restyling and protection professionals choose to partner with ExoShield for exclusive access to a suite of premium products, the industry leading warranties that back our product lineup, and the dedicated account managers that provide world-class customer service. Apply to become an Authorized ExoShield Installer here.
ExoShield GT3+ is applied using the same skills and tools needed to apply window tint. Anyone with a clean operation and sufficient tinting experience can learn to install ExoShield. While ExoShield is considerably thicker than traditional window tint, we've engineered ExoShield to be shrinkable just like tint. The main modification you'll need to make to your installation process is to use more heat when shrinking to compensate for ExoShield's added thickness.
ExoShield offers a suite of premium automotive protection products including a variety of windshield protection and paint protection films. If you own an automotive protection or restyling business, you can purchase ExoShield films by the roll, and consumers have access to our DIY kits for a limited number of vehicles.
ExoShield is a leading manufacturer and supplier of advanced automotive protection solutions. The cutting edge nanotechnology behind ExoShield Products is developed by Alchemy, ExoShield's parent company based in Ontario, Canada. We specialize in high-performance films that help protect vehicles from road debris, environmental damage, and everyday wear, trusted by both professional installers and drivers. Our product line includes world-class windshield protection and paint protection films, designed to protect any vehicle - in every environment.
To join the network of ExoShield installers, please fill out the Partner Application Form, and one of our Account Reps will reach out to you to walk you through the process!
If you have correctly registered your ExoShield purchase using this form, you should have received a confirmation email outlining the details of your warranty coverage. If you registered your warranty but did not receive this email or have misplaced it, please contact us at team@getexoshield.com and a member of our Customer Support team will be in touch shortly.
Yes! The adhesive is designed to adhere firmly to the paint without causing any damage when it's time to remove the film. When handled by a professional you can trust that the film will come off cleanly, leaving no sticky residue or marks on your car's paint.
PPF is a popular choice for those who want to protect their vehicle’s paint from scratches, chips, and other types of damage. A high-quality PPF is exceptionally durable and can last for several years. So, if you want to protect your paint, PPF is absolutely worth it.
PPF is a popular choice for those who want to protect their vehicle’s paint from scratches, chips, and other types of damage. A high-quality PPF is exceptionally durable and can last for several years. So, if you want to protect your paint, PPF is absolutely worth it.
